• 看片你懂的,看片免费APP网站,91看片淫黄大片,免费看片黄色小网站

    Scan code consultation:
    0755-2102 2109
    Service
    Service
    Current locations: Home Service Explosion proof certification and certificate of conformity
    Explosion proof level and certification significance

    SINO Testing Services

    | 2019-12-04|Return

    Explosion proof certification is actually a necessary test that most electrical products must pass and obtain certification certificates. This is not only a guarantee and promotion of product quality, but also allows customers to feel more confident when using it. The country also has a strict set of standards for explosion proof certification. Below is an interpretation of the explosion proof level classification standards brought by Zhongnuo Testing.

    The concept of explosion-proof
    The occurrence of an explosion requires certain prerequisites
    1. Presence of explosive substances (combustibles)
    2. It forms an explosive mixture within a certain space, with a concentration within the explosive limit range of the gas; (Adequate oxygen)
    3. It has an ignition source, and its energy must be greater than the minimum ignition energy of the explosive mixture (reaching the ignition point)
    Only when these three exist simultaneously in a certain area can an explosion occur, which is known as the explosive triangle principle. And what we need to do is to control one or more of these three conditions. The oxygen and explosive substances in explosive environments objectively exist, so what we need to control is the objects (and detonation sources) working in explosive hazardous environments, and this operation is called explosion-proof.

    The significance of explosion prevention
    Explosive substances: Many production sites produce certain combustible substances. About two-thirds of the underground coal mines contain explosive substances; In the chemical industry, over 80% of production workshop areas contain explosive substances. Oxygen: Oxygen in the air is ubiquitous. Ignite source: Electrical instruments are widely used in the production process, and various frictional sparks, mechanical wear sparks, electrostatic sparks, high temperatures, etc. are inevitable, especially when instrument and electrical failures occur.
    Objectively, many industrial sites meet explosion conditions. When the mixture concentration of explosive substances and oxygen is within the explosive limit range, if there is an explosive source, an explosion will occur. Therefore, it is necessary to adopt explosion-proof measures.
     
    Explosion proof level description
    IA level: Electrical equipment that cannot ignite explosive gas mixtures during normal operation, one or two faults.
    When working normally, the safety factor is 2.0;
    When a fault occurs, the safety factor is 1.5;
    When there are two faults, the safety factor is 1.0.
    Note: Spark contacts must be equipped with explosion-proof or airtight enclosures or double the safety factor.
    IB level: Electrical equipment that cannot ignite explosive gas mixtures during normal operation and a malfunction.
    When working normally, the safety factor is 2.0;

    When a fault occurs, the safety factor is 1.5. During normal operation, contacts with sparks must be protected by an explosion-proof or airtight casing, and there should be measures to self display faults. The safety factor for one fault is 1.0.


    Classification of hazardous areas


    Applicability of explosion-proof methods to hazardous locationss



    Classification of explosive hazardous gases

    According to the minimum possible spark energy, explosive gases are classified into four hazard levels in China, Europe, and most countries and regions around the world, as shown in the table below:

    The United States and Canada first classified explosive objects scattered in the air into three classes: Class I gas and vapor; Class II dust; Class III fiber Then divide the gas and dust into groups:


    Classification of gas temperature groups


    Explosion proof signs
    The meaning of Ex ia IIC T4:


    Definition of safety parameters for safety barriers

    Service hotline: 18924609560 (same WeChat account)

    Related Recommendations
    Contact us
    0755-2102 2109
    Address: 1302-1, Building C, Kangjia Guangming Technology Center, No. 288 Xingxin Road, Guangming District, Shenzhen
    Follow us
    Copyright: Shenzhen Zhongnuo Testing Technology Co., Ltd. 粵ICP備53674768號
    服務熱線
    18924609560
    點擊這裏給我發消息 在線谘詢
    點擊這裏給我發消息 在線谘詢
    網站地圖